Thermal Spray Set-Up Technician (3rd shift, Mon-Fri)

Component Repair Technologies.com

Office

Mentor, OH

Full Time

JOB SUMMARYThe entry level Thermal Spray Set-Up Technician (Surface Prep) supports the thermal spray technicians by preparing parts for dimensional restoration. This position primarily prepares and configures the equipment and materials for the thermal spray process. Technicians will apply masking to components for in-process operations, conduct a variety of surface preparations using the blasting process on turbine engine components, and use a variety of materials following the established procedures for both masking and grit blasting. The position performs its primary functions in a climate-controlled and modern state-of-the-art facility. Through our extensive in-house training program, the successful applicant will be instructed via a series of computer based and hands-on training, the necessary skills of the position. COMPANY OVERVIEWComponent Repair Technologies, Inc. (CRT) began as a locally family-owned business, with operations in Mentor, OH since 1985, and grew into a global leader (500+ employees) in the aerospace MRO sector. Specializing in the repair and overhaul of turbine engine components, CRT proudly serves the world’s largest airlines and jet engine manufactures. Component Repair Technologies is focused on our valued employees, customers, and community. In 2025, CRT became a Safran Aircraft Engines company as a Center of Excellence for the repair of large jet engine parts in the Americas. For over 120 years, Safran, through its Aircraft Engines subsidiary, designs, produces, markets and supports, alone or in partnership, aircraft engines offering world-class performance and reliability. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Operating through CFM International, its 50/50 joint venture with GE Aerospace, Safran Aircraft Engines is the world’s leading supplier of single-aisle commercial jet engines, the CFM56 and LEAP. Safran Aircraft Engines is fully committed to sustainable aviation through the RISE (Revolutionary Innovation for Sustainable Engines) technology development program. Safran Aircraft Engines also deploys a global network providing a full range of support, maintenance & repair services. Visit www.componentrepair.comand www.safran-group.comfor more information. Take-off in your career, learn new skills and become part of a world-class workforce. DUTIES AND RESPONSIBILITIESThrough our extensive in-house training program, (OJT) the successful applicant will be instructed via a series of computer based and hands-on training, the necessary skills of the position.1. Follow established safety protocols and guidelines to ensure full compliance with company safety policies and procedures.2. Review router and operational sketches to identify the work to be performed.3. Grit blast all required areas to the appropriate surface finish specified in the work instructions.4. Gather and set up required tooling such as fixtures, gauges, and other miscellaneous items.5. Inspect work for completion and quality.6. Organize components staged in your department to support a more efficient schedule.7. Mask components as required to protect surfaces from subsequent operations.8. Remove masking from components, clean with solvents by hand or power wash.9. Follow written work instructions accurately including engineered sketches and drawings. 10. Follow verbal instructions. Clearly understand all instructions before proceeding with work. Communicate frequently with fellow technicians regarding work instructions.11. General housekeeping such as sweeping, organizing, and general cleanup. REQUIRED QUALIFICATIONS1. High school or technical school graduate or equivalent.2. Previous experience in reading and interpreting shop drawings and diagrams or the demonstrated ability to learn.3. Previous experience in a manufacturing setting displaying an attention to detail and technical aptitude. OTHER QUALIFICATIONS1. Basic knowledge of computers and standard software programs.2. Read, write, speak, and understand the English language.3. Must be able to use hand tools and have good hand eye coordination. 4. Ability to work independently and perform the job with minimum supervision. WORK ENVIRONMENT1. This position has pre-employment testing requirements that may require fitness for duty testing and a vision exam.2. Work in varying positions from time to time. Stand and/or sit for portions of the shift. Move parts (>50 pounds) using hoists, slings, carts, or other handling methods. Move less heavy parts (<50 pounds) with or without hoists, slings, or carts. 3. Follow all safety and environmental rules that apply.4. Use of safety and personal protective equipment is mandatory under some conditions. The following may or may not be required.a. Ear plugs.b. Safety glasses.c. Uniform.5. Use powered and hand-held tools frequently.
COMPANY BENEFITSOur employees and families are the number one asset at CRT. A progressive and innovative benefits package is in place, such as: 1. CRT currently offers two excellent health care options, one being a fully funded program (no premiums for employee and family) and the other being a traditional employee premium contribution. Programs include health, vision, and dental coverages. Additional programs include short- and long-term disability and life insurance.2. The company offers a 401k program with company match.3. Continuing education is offered via multiple sources and opportunities with tuition reimbursement based on eligibility requirements.4. Traditional paid time off (PTO) is offered via vacation days and personal days.5. Multiple shift opportunities with hourly premiums for off-shifts are offered.6. To review other benefits, visit our website at www.componentrepair.com/careers or Facebook page www.facebook.com/ComponentRepair to see, “what we are up to.”
#IND